TALULOCK Wire Rope Socketing Resin
TALULOCK Wire Rope Socketing Resin is a two-component epoxy resin for socketing wire rope terminations. The rope end is broomed and cleaned, placed in the socket, and the mixed resin is poured in. When it cures, it grips the individual wires and locks the rope in place. A correctly socketed termination is as strong as the wire rope itself — 100% termination efficiency.
This wire rope socketing resin is made for the jobs where a termination must not fail: offshore mooring, crane and heavy-lift rigging, and marine work. It is an epoxy resin for wire rope socketing, not a polyester resin. That matters because the epoxy grips harder onto the wires, with less shrinkage and fewer air pockets than conventional polyester resins — including in small end-stops, where a weak grip shows up first.
Talurit makes the TALULOCK Wire Rope Socketing Resin in Sweden. Talurit has worked with wire rope terminations since 1948 and pioneered mechanical splicing. This resin socketing compound is DNV type-approved to DNV-CP-0095 and DNV-OS-E304, and it meets the performance requirements of EN 13411-4 and ISO 17558. SSTC supplies it in Saudi Arabia in 250, 500, 1000 and 2000cc kits, with custom kits on request.
Key Advantages of TALULOCK Wire Rope Socketing Resin
Every part of this TALULOCK Wire Rope Socketing Resin serves one job: a termination that holds at full rope strength and is safer to make.
- Stronger grip on the wires: the epoxy-based formula holds stronger onto the individual wires than conventional polyester resins, for a more complete and reliable termination.
- 100% termination efficiency: a correctly socketed termination is as strong as the wire rope itself, when the socketing is done to the Talurit instructions.
- DNV type-approved: this DNV-approved socketing resin holds DNV type approval under DNV-CP-0095 for pourable compounds used in rope socketing and DNV-OS-E304 for offshore mooring steel wire ropes, certificate TAK00002SF.
- Safer for the people who use it: no solvents requiring respiratory protection under normal use, and no carcinogenic constituents. Standard gloves, eye protection and protective clothing are sufficient for routine mixing and pouring.
- Non-flammable resin component: the resin component is non-flammable, which makes the kits easier and safer to store and ship — including by air freight.
- Long shelf life, less waste: up to 30 months shelf life at storage temperatures up to 30 °C, so you can stock it and use it when the job comes, instead of ordering at the last minute.
- Pre-portioned kits, repeatable result: the two-component kits are pre-portioned, with a clear step-by-step process, so a competent operator can get a correct, repeatable result every time. You do not have to pour in one go — topping up is supported by the formulation.
- For steel wire ropes and synthetic ropes: this synthetic rope socketing resin is made for wire ropes and various synthetic ropes, so one resin covers more of your socketing work.
- At least 15% renewable content: at least 15% of the formulation comes from renewable raw materials, without giving up durability or mechanical performance.
Technical Specifications
The tables below give the kit sizes and the technical data for the TALULOCK Wire Rope Socketing Resin, exactly as stated in the Talurit product sheet (Rev. 2026-05-18). All values are at 20 °C ambient unless otherwise stated.
| KIT SIZE | PART | Order & Pricing |
|---|---|---|
| CC | Code | |
| 250 cc | TALULOCK 250CC | |
| 500 cc | TALULOCK 500CC | |
| 1000 cc | TALULOCK 1000CC | |
| 2000 cc | TALULOCK 2000CC | |
| Custom | On request | |
| Property | TALULOCK Wire Rope Socketing Resin |
|---|---|
| Resin system | Two-component epoxy |
| Pot life | 14 minutes |
| Gel time | 20–40 minutes |
| Full cure | About 60 minutes |
| Operating temperature range | –40 °C to +95 °C (–40 °F to +203 °F) |
| Shelf life (at up to 30 °C) | 30 months |
| Renewable content | At least 15% |
| Standards met | EN 13411-4, ISO 17558 |
| DNV type approval | DNV-CP-0095, DNV-OS-E304, certificate TAK00002SF |
| Manufacturer | Talurit AB, Sweden |
| Manufacturer certifications | ISO 9001:2015, ISO 14001:2015 |
What Is in the Kit
- Two components: a resin component and a hardener component, pre-portioned for the kit size.
- Step-by-step instructions: the kit follows the Talurit Instructions for Use for TALULOCK — read them in full before you start, and read the Safety Data Sheets for the resin and the hardener as well.
- Socket not included: the resin is poured into a spelter socket or end-stop supplied separately. Use a socket made for resin socketing.
Pros of TALULOCK Wire Rope Socketing Resin
- Epoxy grip: The epoxy-based formula grips harder onto the wires than conventional polyester resins, with less shrinkage and fewer air pockets.
- Safer handling: No solvents requiring respiratory protection under normal use, and no carcinogenic constituents.
- Non-flammable resin component: The resin component is non-flammable, which suits storage, transport and air freight better.
- Longer shelf life: Up to 30 months at up to 30 °C, a full year longer than WIRELOCK.
- Synthetic ropes as well: Made for wire ropes and various synthetic ropes, not only steel wire rope.
Cons of TALULOCK Wire Rope Socketing Resin
- New product, no long track record: Launched in October 2026, so it has no 50-year history yet. Early buyers are trusting the DNV approval and the Talurit name, not decades of site use.
- Fewer approvals listed: DNV type approval only in the sources checked. No Lloyd’s or ABS approval is listed for the TALULOCK Wire Rope Socketing Resin.
- Narrower temperature range: -40 °C to +95 °C, against -54 °C to +116 °C for WIRELOCK.
- Smaller standard kit range: Standard kits start at 250cc, with no 100cc kit, and stop at 2000cc (custom kits on request).
- No booster pack mentioned: No cold-weather booster pack is mentioned in the TALULOCK product sheet checked.
- No rope-size chart yet: The product sheet gives no rope-diameter figure per kit, so the kit must be matched to the socket by SSTC — see the size section above.
Which one should you choose?
- Choose WIRELOCK if: your specification names WIRELOCK, you need Lloyd’s or ABS approval, you work below -40 °C or above +95 °C, or you need a 100cc kit or a booster pack for cold pouring.
- Choose TALULOCK Wire Rope Socketing Resin if: you want epoxy grip, safer handling, a non-flammable resin component, a 30-month shelf life, or you socket synthetic ropes as well as steel wire ropes.
- Still unsure: tell SSTC your socket, rope and job, and we will quote both resins and help you choose. SSTC supplies both, so the advice is not tied to one brand.
How to Choose the Right Size
The TALULOCK Wire Rope Socketing Resin comes in four kit sizes — the full sizes and part codes are in the table above, so they are not repeated here.
- Choose by socket volume, not by rope length: the kit size is the volume of mixed resin the kit makes. Pick the kit that fills your socket basket with a little to spare.
- Small end-stops and precision work: start with the 250cc kit. It suits small sockets and end-stops, where the stronger grip and lower air-pocket risk of this epoxy matter most.
- Crane and rigging sockets: the 500cc and 1000cc kits cover the common crane and heavy-lift socket sizes. If you socket the same size often, keep the next size up in stock as well.
- Offshore mooring and large sockets: the 2000cc kit, or a custom kit on request, is for large mooring and heavy-lift sockets. Ask SSTC if you are not sure which volume your socket needs.
- Still unsure: send us the socket type and size and we will match the kit. Do not guess — a short pour is a failed termination.
Industrial Applications in KSA
This TALULOCK Wire Rope Socketing Resin earns its keep anywhere in the Kingdom where a wire rope termination must hold at full strength — as a spelter socket resin for sockets and end-stops:
- Offshore mooring and subsea lifting in the Arabian Gulf
- Crane, hoist and heavy-lift rigging on construction and industrial sites in Riyadh, Dammam and Jubail
- Marine and port rigging in Jeddah and Dammam
- Industrial and construction wire rope terminations across the Eastern Province
- Small end-stops and precision assemblies in workshops and fabrication yards
- Aerospace and entertainment rigging where a compact, reliable termination is needed
How to Use TALULOCK Wire Rope Socketing Resin
Follow the Talurit Instructions for Use for TALULOCK in full. The steps below are a summary only — the instructions and the Safety Data Sheets are the authority. An epoxy resin for wire rope socketing must be mixed and poured inside its pot life, so read the times in the table above before you start.
- Read first: read the Instructions for Use and both Safety Data Sheets before you open a kit.
- Prepare the rope: broom the wire rope end and clean the wires as the instructions say. A dirty or greasy broom will not bond, whatever resin you use.
- Prepare the socket: fit the rope in the socket and seal the base so no resin leaks out during the pour.
- Mix the pre-portioned kit: mix the resin and hardener components as instructed. Work inside the 14-minute pot life — do not mix a kit you cannot pour in time.
- Pour and top up if needed: pour the mixed spelter socket resin into the socket. You do not have to pour in one go — topping up is supported by the formulation without affecting the integrity of the socketing.
- Let it cure: gel time is 20–40 minutes and full cure is about 60 minutes. Do not load the rope before the resin has fully cured.
- Check before use: inspect the finished socketing before the assembly goes into service, and keep the kit batch and socket details with your records.
Key Safety Advantages
This TALULOCK Wire Rope Socketing Resin is made to be safer to handle than the older socketing resins, without giving up strength.
- No solvents needing respiratory protection: the resin contains no solvents that require respiratory protection under normal use.
- No carcinogenic constituents: the formulation contains no carcinogenic constituents.
- Non-flammable resin component: the resin component is non-flammable, which lowers the fire risk in storage and transport and suits air freight better than flammable resins.
- Standard protection is sufficient: standard gloves, eye protection and protective clothing are sufficient for routine mixing and pouring.
- Lower environmental footprint: at least 15% renewable content, and a 30-month shelf life that cuts waste from expired stock.
Precautions & Safety Protocols
Straight talk about this resin, because a socketing resin is only safe if it is used the way the maker instructs.
- Read the Safety Data Sheets: read the resin and hardener Safety Data Sheets before use, and follow them. Do not rely on this page alone.
- Protect skin and eyes: wear gloves, eye protection and protective clothing during mixing and pouring. Wash skin after contact and keep the resin out of the eyes.
- Work in a ventilated area: mix and pour in a well-ventilated area, even though no respiratory protection is required under normal use.
- Respect the pot life: the 14-minute pot life is real. A kit that has started to gel in the pot must not be poured — start again with a fresh kit.
- Never load before full cure: do not put any load on the rope until the resin has fully cured, about 60 minutes. A loaded socket that has not cured is an unsafe termination.
- Stay inside the temperature range: the cured socketing is made for –40 °C to +95 °C. Do not expose it to temperatures beyond that range.
- Store it right: store the kits in a cool, dry place at up to 30 °C, away from direct heat. Do not use a kit past its shelf life.
- Keep it out of drains and watercourses: do not pour leftover resin down a drain. Dispose of waste resin and empty kits as the Safety Data Sheets and local rules require.
Frequently Asked Questions
Straight answers about the TALULOCK Wire Rope Socketing Resin — the questions buyers ask us most.
- What is TALULOCK Wire Rope Socketing Resin?
It is a two-component epoxy resin socketing compound. Pour the mixed resin into a spelter socket around a broomed rope end — when it cures, it locks the rope at 100% termination efficiency. - How is TALULOCK different from WIRELOCK?
WIRELOCK is the original polyester cold socketing compound, used for 50+ years. TALULOCK is the newer epoxy resin — harder grip, non-flammable resin component, safer handling and 30 months shelf life instead of 18. - Which kit size should I choose — 250, 500, 1000 or 2000cc?
Choose by the volume your socket needs — the kit size is the mixed resin volume it makes. The sheet gives no rope-diameter figure per kit, so send us your socket size and we will match the kit. - How long does it take to cure, and when can I load the rope?
Pot life 14 minutes, gel time 20–40 minutes, full cure about 60 minutes, all at 20 °C. Do not load the rope before the resin has fully cured. - Do I need respiratory protection to use it?
Under normal use, no — it has no solvents needing respiratory protection and no carcinogenic constituents. Standard gloves, eye protection and protective clothing are enough. - Can it be used for synthetic ropes as well as steel wire ropes?
Yes — it is made for wire ropes and various synthetic ropes. The standards listed are steel wire rope standards, so tell us your rope type first and we will confirm suitability. - Do you deliver across Saudi Arabia, and how do I get a price?
Yes. SSTC supplies this wire rope socketing resin across the Kingdom — Dammam, Riyadh, Jeddah, Jubail, Yanbu and beyond. Send your kit size and quantity for a quote.
Ready to socket with epoxy? Ask for the TALULOCK Wire Rope Socketing Resin by kit size — 250, 500, 1000 or 2000cc — and SSTC will quote single kits, project quantities and custom kits, delivered across Saudi Arabia. This DNV-approved socketing resin is a Talurit socketing resin made in Sweden.






































































































































Reviews
There are no reviews yet.